Okuma Makaira 10 SEa 2-Speed Drag Reel Gunsmoke

Design, drive, drag and durability

A special edition of the Makaira that features a gunmetal finish,
the Okuma Makaira 10 SEa 2-Speed Drag Reel is
designed for a variety of saltwater game fish. It’s smooth as it is
sleek with its Carbonite Dual Force drag system and its helical cut
gears. It also features a new oversized handle and lower low speed
gearing. The SEa is ideal if you want your gear to stand up to the
most intense use. The new Makaira SEa features a carbon Dual Force
Drag system for exceptional drag performance, high drag capacity,
and durability. This new reel sets a standard that will advance the
ability and redefine the expectations of tournament crews,
long-range anglers and private boaters.

Dual Force Drag DFD
Incorporates both surfaces of the spool to maximise high-end drag
pressure, efficiency and overall smoothness. Mounted in the top of
the spool and protected by the Hydro Block system is a multi-disc
felt drag system that works in conjunction with a secondary drag
system that is mounted under the spool. Even pressure is applied to
both surfaces of the spool for maximum stability.

Carbonite
Okuma’s all-new “Carbonite” drag system features a newly-developed
carbon-based drag material which displaces heat and friction
consistently and steadily even under the harshest of fishing
conditions. Used in conjunction with a small amount of
specially-formulated Okuma drag grease, the Carbonite drag system
allows for a much wider and smoother drag range, all while
maintaining exceptional performance and pure fish-stopping
power.

Machined Rigid Frame
Okuma’s Machined Rigid Frame construction incorporates a one-piece
fully-machined aluminium frame. These rigid bar-stock aluminium
frames are the ultimate in precision alignment and tolerances
withstanding more pressure and torque than any other material used
in our industry for frame materials. Okuma features these anodised
frames on fly reels, baitcast reels, lever drag reels and star drag
trolling reels.

2-Speed Gearing
Okuma’s 2-speed technology incorporates two sets of stainless steel
main and pinion gears, allowing anglers the option of a high-speed
gear ratio or a powerful low-speed gear ratio for maximum power and
torque. To shift gears it is as easy as pushing a button or popping
a lever with Okuma’s unique shifting design to obtain the
appropriate gear ratio you desire.

T-Bar
T-Bar Handle: The patented design of the T-Bar handle offers a true
ergonomically correct angle to ensure an angler gets maximum power
with minimum fatigue. The T-bar takes full advantage of the natural
dynamics of the human hand, wrist and forearm to help sustain power
and endurance for the angler.

Okuma Makaira 10 SEa 2-Speed Drag Reel
Features:

• Features Special Edition Gun Smoke and Black anodising
• Open spool bearings with TSI-301 oil, increases freespool 2-1/2
  times
• Yellowfin tuna etched into the side plate.
• Frames have been machined out for increased clearance between
  spool and cross bars
• MK-20 size handle knobs
• 6061-T6 Machined aluminium frame with forged side
  plates
• 17-4 stainless steel gearing
• Helical cut gears for increased torque, smoothness and improved
  gear meshing
• Two-speed gearing systems
• Cold forged, Type-II anodised, machined aluminum spool
• CRC: Corrosion-Resistant Coating process
• Patented spool pin system for use with braided or mono
  lines
• Carbonite Dual Force Drag system featuring Cal’s universal drag
  grease
• Custom designed thrust bearing: Alleviates side load on heavy
  drag settings
• 4-pcs ABEC-5 precision Sapporo stainless steel ball
  bearings
• Double dog, proprietary silent anti-reverse system
• Ratcheting drag lever and drag cam for precise drag
  setting
• Patented T-Bar handle with Easy Roll graphite insert on all
  models
• Heavy duty stainless steel ratcheting clicker system
• Heavy duty, 17-4 grade stainless steel drive and spool
  shafts
• Type-II gunmetal anodised frame, side plates, spool, drag lever
  and handle
• Machined thumb rest on rear cross bar for improved
  ergonomics
• Forged aluminium, full hard anodised reel foot and reel
  clamp
• Precision placement of drain holes maximises water removal from
  reel
• Special screw ports around side plate screws reduces
  water/corrosion buildup

Okuma Makaira 10 SEa 2-Speed Drag Reel
Specifications:

• Model: 10 SEa
• Line capacity (yds/lb): 460/15, 380/20, 280/25
• Line retrieve: 33.5″ (High), 15″ (Low)
• Gear Ratio: 4.7:1 (High), 2.1:1 (Low)
• Bearings: 4BB + 1TB
• Max drag (full): 34lb
• Max drag (strike): 27lb
• Weight: 26.1oz